Choose a Suitable Assembly Area

Select a clean, dry, and sufficiently spacious area. Make sure there is enough room to lay out furniture panels, frames, hardware, and other components without blocking doorways or walkways.

Protect the Floor and Furniture Surfaces

Place a protective blanket, cardboard sheet, or suitable floor covering beneath the working area. This can help reduce scratches, dents, and other accidental surface damage.

Review the Assembly Instructions

Read the complete instruction manual before starting. Identify the assembly sequence, component labels, hardware requirements, and any warnings specific to the product.

Check the Available Space

Confirm that the assembled furniture will fit the intended location. Consider room dimensions, ceiling height, doorways, corridors, staircases, and nearby furniture.

Check the Outer Packaging

Look for visible signs of crushing, punctures, moisture, or other damage. Handle the packaging carefully when opening it to avoid scratching or cutting furniture components.

Count the Components

Compare the supplied panels, legs, frames, supports, fasteners, and accessories with the parts list in the assembly instructions.

Inspect Individual Parts

Examine visible surfaces, corners, edges, joints, and connection points. Do not install components that appear cracked, significantly damaged, or unsuitable for their intended position.

Organize Small Hardware

Separate screws, bolts, washers, connectors, and other small accessories into labeled containers. Keeping similar parts organized makes them easier to identify during assembly.

Screwdrivers

Phillips and flathead screwdrivers are commonly used for furniture assembly. Select the correct size to avoid damaging screw heads or surrounding surfaces.

Allen Keys and Hex Wrenches

Many furniture products use hexagonal fasteners. Use the correctly sized Allen key to ensure a secure connection without damaging the hardware.

Measuring Tape and Level

A measuring tape helps verify dimensions and placement. A level can help determine whether furniture is positioned evenly on the floor.

Soft Cloth and Protective Padding

Use a soft cloth to protect finished surfaces during handling. Protective padding can help prevent accidental contact between furniture components and hard floors.

Power Tools

Use power tools only when permitted by the product instructions. Choose an appropriate torque setting and avoid excessive force, which may strip threads, crack materials, or damage fasteners.

Important: Do not use tools or accessories that are incompatible with the supplied hardware. If you are unsure about a particular component, consult the product instructions before proceeding.

STEP 01

Identify All Parts

Match each component with its corresponding label or diagram. Arrange the pieces in the order they will be used.

STEP 02

Prepare the Main Structure

Position the primary panels, frames, or supporting components according to the assembly diagram. Make sure their orientation is correct.

STEP 03

Connect the Components

Install the specified fasteners and connectors. Initially tighten connections only as directed by the instructions so that the structure can be aligned correctly.

STEP 04

Align and Secure the Structure

Check that the components are correctly positioned and aligned. Tighten the fasteners according to the manufacturer's instructions without applying excessive force.

STEP 05

Install the Remaining Components

Attach shelves, drawers, cushions, handles, legs, or other product-specific components in the sequence shown in the manual.

STEP 06

Complete the Final Inspection

Check all connections, moving components, alignment, and stability before using the furniture. Follow any additional safety instructions supplied with the product.

Tables and Dining Furniture

Check the tabletop orientation, leg positions, support brackets, and connection points. Ensure that all legs are securely attached and that the table stands evenly.

For extendable tables, inspect the extension mechanism and follow the specified operating instructions.

Chairs and Seating

Confirm the correct placement of the seat, backrest, legs, and supporting brackets. Tighten connections evenly to help maintain stability.

For upholstered chairs, avoid placing unnecessary pressure on fabric, seams, and cushioning during assembly.

Beds and Bed Frames

Check the headboard, side rails, center supports, slats, and other structural components. Make sure all support elements are installed in their designated positions.

Verify that the mattress dimensions are compatible with the assembled bed frame.

Cabinets and Storage Furniture

Pay attention to panel orientation, back panels, shelves, hinges, and drawer runners. Align the cabinet before fully tightening the relevant connections.

Tall storage units should be secured using the appropriate anti-tip hardware and wall attachment method specified by the manufacturer.

Sofas and Upholstered Furniture

Check the frame, connecting brackets, feet, cushions, and any removable components. Follow the product instructions when attaching modular sections or reclining mechanisms.

Avoid lifting upholstered furniture by its cushions or unsupported decorative sections.

Outdoor Furniture

Assemble outdoor furniture on an even surface and check that all joints and fasteners are correctly installed. Follow the product-specific guidance for outdoor positioning and weather protection.

Check the Floor Surface

Place furniture on a stable and level surface whenever possible. If the floor is uneven, use only suitable adjustment features or approved leveling accessories.

Maintain Sufficient Clearance

Leave enough space around furniture for doors, drawers, chairs, and other moving components to operate properly. Keep essential walking routes clear.

Consider Lighting and Ventilation

Avoid positioning furniture where it unnecessarily blocks natural light or ventilation. Consider the effects of direct sunlight and heat on sensitive materials and finishes.

Protect Walls and Floors

Use suitable floor protectors where appropriate. Move furniture carefully and avoid dragging heavy pieces across delicate flooring.

Secure Tall Furniture

Follow the manufacturer's anti-tip instructions for bookcases, wardrobes, cabinets, and other tall or potentially unstable furniture. Use the appropriate wall anchors and fixings for the wall construction.

Use Appropriate Protective Equipment

Wear suitable work gloves when handling sharp-edged components and protective eyewear when required. Keep hands away from pinch points and moving mechanisms.

Lift Heavy Components Carefully

Use appropriate lifting techniques and ask another person for assistance when handling large or heavy furniture components. Avoid attempting to lift oversized items alone.

Keep Children and Pets Away

Keep children and pets away from the assembly area, small hardware, tools, packaging materials, and partially assembled furniture.

Avoid Excessive Tightening

Do not overtighten screws or bolts. Excessive force may damage threads, crack panels, or compromise the connection between components.

Do Not Use Incomplete Furniture

Do not use furniture before all required structural components and safety-related connections have been correctly installed and checked.

Follow Product-Specific Warnings

Always follow the warnings and installation requirements supplied with the product. If an instruction is unclear, stop and seek clarification before proceeding.

01. Confirm that all listed components have been installed.

02. Check that all required screws, bolts, and connectors are correctly secured.

03. Check the alignment and overall stability of the structure.

04. Make sure drawers, doors, hinges, and other moving components operate correctly.

05. Confirm that the furniture is positioned on an appropriate surface.

06. Check that applicable anti-tip devices and safety attachments are installed.

07. Remove loose packaging materials and unused hardware from the area.

Clean According to Material Type

Use suitable cleaning products and soft materials for the furniture surface. Follow the manufacturer's instructions to avoid damaging coatings, upholstery, or finishes.

Inspect Fasteners Periodically

Check accessible screws, bolts, and connections at appropriate intervals. If a connection becomes loose, follow the product instructions for inspection and adjustment.

Protect Moving Components

Keep drawer runners, hinges, folding mechanisms, and adjustable components clean. Use maintenance products only when recommended by the manufacturer.

Respond to Changes in Stability

If furniture begins to wobble, make unusual noises, or show signs of structural damage, stop using it until the issue has been inspected and appropriately addressed.

Screw Holes Do Not Align

Check whether the panels or brackets have been positioned in the correct orientation. Loosen previously installed fasteners slightly if the instructions allow, realign the components, and then secure them in the specified order.

Furniture Feels Unstable

Check the floor surface, leg positioning, support brackets, and fasteners. Do not use unstable furniture until the cause has been identified and corrected according to the product instructions.

Drawers or Doors Do Not Close Properly

Review the alignment of hinges, drawer runners, and cabinet panels. Check whether the relevant components have been installed in the correct positions.

Hardware Appears to Be Missing

Recheck the packaging, hardware bags, and parts list. Avoid substituting unrelated fasteners, as incorrect hardware may affect the connection and stability of the furniture.

Surface Damage During Assembly

Stop working and inspect the affected area. Use suitable protective coverings during future handling and avoid placing tools or hard components directly on finished surfaces.

Before Assembly

✓ Read the product assembly instructions.

✓ Prepare a clean and spacious working area.

✓ Inspect packaging and individual components.

✓ Organize tools and hardware.

During Assembly

✓ Follow the specified assembly sequence.

✓ Check component orientation and alignment.

✓ Use the correct fasteners and tools.

✓ Avoid excessive tightening or unnecessary force.

After Assembly

✓ Inspect the structure and connections.

✓ Check stability and moving components.

✓ Install required safety attachments.

✓ Remove packaging and organize the area.

1. Do all furniture products require assembly?

Assembly requirements vary by product. Some furniture arrives fully assembled, while other products require partial or complete assembly. Check the product description and supplied instructions for details.

2. What tools do I need to assemble furniture?

Common tools include screwdrivers, Allen keys, measuring tapes, and suitable protective materials. The exact requirements depend on the furniture design and supplied hardware.

3. Can I assemble furniture by myself?

Some smaller furniture products may be suitable for individual assembly. Large, heavy, or complex furniture should be handled with assistance when necessary. Always follow the manufacturer's safety guidance.

4. What should I do if a component is missing?

Check the packaging, hardware bags, and parts list again. If a component is still missing, contact customer service with your order information and a description of the missing part. Avoid using substitute hardware without confirmation that it is compatible.

5. What should I do if the screw holes do not align?

Stop and check the orientation of the components against the assembly diagram. Do not force the parts together or drill additional holes unless specifically instructed by the manufacturer.

6. Why is my assembled furniture unstable?

Possible reasons include uneven flooring, incorrectly positioned components, loose fasteners, or missing support parts. Check the assembly instructions and do not use the furniture until it is stable.

7. Should I tighten all screws immediately?

Follow the sequence in the product instructions. Some designs require initial loose connections to allow alignment before final tightening. Avoid applying excessive force.

8. Do tall cabinets need to be attached to the wall?

Tall or potentially unstable furniture should be secured using the anti-tip devices and installation method specified by the manufacturer. Use suitable fixings for the wall construction.

9. When can I start using newly assembled furniture?

Use the furniture only after assembly is complete and all required connections and safety features have been checked. Follow any product-specific instructions regarding initial use.

10. How should I maintain furniture after installation?

Clean surfaces using suitable methods, inspect accessible connections periodically, and follow the manufacturer's care and maintenance recommendations.

BRAND

chevronform

EMAIL

grainvault@chevronform.com

PHONE

+81 (709) 385 14 99

ADDRESS

37-1 Nishikami, Harumachi (Mavericks 206)
Toyohashi, Aichi 441-3111
Japan

CUSTOMER SERVICE HOURS

Monday – Friday: 9:00 AM – 5:00 PM

Excluding public holidays.